S&C's TripSaver® II CutoutMounted Reclosers Help Rural Utility Break

Trip Saver Ii. TripSaver® II CutoutMounted Recloser Page 59: Field Pairing A Tripsaver Ii Recloser 1.8, there may be a need to pair a TripSaver II recloser using an older version of the firmware with a com- munications gateway. For utilities using a "fuse-saving" philosophy, the TripSaver II recloser drops open at the end of its operating sequence in the same

Page 90 Mode setting can be saved to the setpoint file by selecting it and clicking the Save Setpoints button on the menu bar Unsafe high voltage can be present on the connectors on the outside of the internal control box assembly, resulting in serious injury or death.

TripSaver® II CutoutMounted Recloser CIC P LTD

Page 90 Mode setting can be saved to the setpoint file by selecting it and clicking the Save Setpoints button on the menu bar ② Minimum trip current is 5 amperes for 40 A continuous, 5 amperes for 100 A continuous and 10 amperes for 200 A continuous TripSaver II reclosers Because the fault is persistent, the TripSaver II Cutout-Mounted Recloser performs additional tripping operations per the specified TCC curves

How TripSaver® II CutoutMounted Reclosers can boost your grid S&C. TripSaver II reclosers must be furnished with the Extended Open Interval option, which allows up to a 30-second open interval between reclose operations Unsafe high voltage can be present on the connectors on the outside of the internal control box assembly, resulting in serious injury or death.

Reconectador Montado en Cortacircuito TripSaver II RELSAMEX. (This video was updated in December 2020)This instruction video for installing your S&C TripSaver® II Cutout-Mounted Recloser is intended for use in conjunct. ⬤ Applicable for protection of single-phase-to-neutral circuits only in solidly-grounded-neutral (multi-grounded-neutral) 34.5-kV systems where leakage distance to ground meets user's requirement.